UV Printer – Two Attributes to Consider if Looking Into Choosing a UV Printer.

Would you like to add a photo in your quilt that looked a lot more like section of the fabric than an iron-on decal?

In the past, we used photo transfer paper to iron our photo onto our quilt block. Have you heard about direct-to-garment printing? It’s a fantastic new method to get your favorite photo from your scrapbook and on your quilt block.

Direct-to-garment (DTG) printing is a kind of digital printing. Using a value of about $20,000, it’s not practical to work out and purchase your own personal DTG printer. The normal price for coffee printer is $8 to $10.

This technique is a bit higher priced compared to traditional photo transfer method. That’s partially for the reason that technology is indeed new. Should you choose to consider using a DTG photo on your own memory quilt block, there are some things to look for when deciding on the printer who will perform meet your needs:

1. Ensure there are actually no chemicals necessary to pre-treat your fabric first. Some DTG printers create a photo that may be similar to screen printing. You don’t want that seem to be or feel on your quilt. The ink is going to be hard in addition to the fabric and will eventually (sometimes much sooner than later) are going to crack and wear with washings. Ask your prospective printer to discover a sample of something they’ve printed. Provided you can feel the ink is raised over the surface in any respect at all, it’s probably a sublimation type process which requires chemicals to pre-treat the fabric.

2. Use a type of digital DTG printing available from the Brother GT 541. You will find no chemicals required to pre-treat the fabric. The inks bond together with the natural fibers and so are heat cured to set the graphic. The inks are water based, which will help leave a soft yet crisp image on the fabric.

There are a few downfalls to using led uv printer in your quilt blocks. One pitfall is color limitations. Since DTG printing is actually a form an electronic printing, there is absolutely no white ink. White is the lack of color. Because of this you can not print a picture on deep blue or black fabric.

Digital garment or fabric printing can be a CMYK format – cyan, magenta, yellow, and black. It is possible to mix those colors to acquire a full spectrum of accurate colors – hardly white. You can find DTG printers that print white ink, but the majority of those require chemical pre-treatment of the material and can leave you with that thick surface print.

You need to utilize a light colored or neutral fabric and it ought to be cotton or even a cotton blend. The material must have the ability to withstand 350 degrees for approximately thirty seconds. When you are not 09dexypky with 100 % cotton or perhaps a 50/50 blend, ask your printer in the event the fabric work.

Scale of your print may be a limitation. Most DTG printers use a printing field as much as 14 inches x 16 inches. For almost all quilters, that size range won’t be a problem.

And talking about printing fields, here’s a hint. Most direct to dtg printer charge for the 14×16 surface. When your blocks will permit 2 or 3 photos to match within that range, you could get all of them printed for the price tag on one. Consult with the printer to find out if it’s possible with your particular project.

Similar to most technological advances, the price tag on digital garment (or fabric) printing probably will decrease over time. Maybe it can be also seen on smaller printers for home and personal use. Until then, see if you can look for a DTG printer for your upcoming photo quilt project. The results will look like custom fabric, that is to be a great touch for your personal unique quilt!